LOADING

XCWY · Custom Metal Stamping & Deep Drawing

Get a Quote in 3 Hours Email us WhatsApp Call +86 138 3170 9345

Floor-standing and rack-mount structures

Custom Metal Cabinets and Equipment Racks

Floor-standing cabinets, 19-inch racks, distribution cabinets and equipment housings — built as welded structures with the mounting, ventilation and finish your installation actually needs.

• 1.0–3.0 mm — Typical panel gauge
• Welded — Structural frames
• 19-inch — Rack mounting
• RAL match — Powder coating

Structure first, panels second

A cabinet is a load-bearing frame with skins attached. We design the weld sequence around squareness and door alignment, because a twisted frame cannot be corrected by adjusting hinges.

Mounting planned to your equipment

Rack rails, adjustable mounting plates, cable management, gland plates and plinth details are positioned from your equipment layout, not a generic template.

Airflow considered at the drawing stage

Vent positions, filter apertures, fan cutouts and cable entry all affect thermal performance and ingress protection. These get resolved before tooling, not after the first unit overheats.

Specifications

Common materials	Cold rolled steel, galvanized steel, SS304, AL5052
Panel thickness	1.0 – 3.0 mm; frames to 6.0 mm where loading requires
Structure	Welded frame with bolted or welded skins
Mounting	19-inch rails, adjustable plates, DIN rail, cable management
Access	Hinged and removable doors, side panels, lockable handles
Finishing	Powder coating to RAL, zinc plating, brushed stainless
Quality basis	ISO 9001:2015 · registration 34025Q30296R0S

FAQ

Can you build cabinets to a specific rack unit height?

Yes. Give us the required U height, rail pitch standard and depth, and we cut the rail apertures from a nested pattern so hole positions stay consistent across the batch.

What is the difference between an enclosure and a cabinet in your quoting?

We treat an enclosure as a sealed box, usually wall or pole mounted, where ingress protection dominates. A cabinet is a floor-standing or rack structure where frame squareness, load path and access dominate. Different critical dimensions, different inspection plan.

Do you supply cabinets assembled or flat-packed?

Both. Welded frames ship assembled. Where freight volume is the larger cost, bolt-together designs can ship flat for assembly at destination — tell us which you prefer at RFQ and we design accordingly.

Can you fit locks, hinges, castors and levelling feet?

Yes, in-house. Specify the hardware or let us propose equivalents. Hardware is fitted and function-checked before packing.

What load can a cabinet frame carry?

That is determined by frame gauge, bracing and the load distribution of your equipment. Tell us the total mass and how it is mounted, and our engineer specifies frame thickness and bracing during DFM review.

Do you offer cabinets in stainless steel?

Yes — SS304 for general washdown and humid environments, SS316 where chlorides are present. Both can be supplied brushed, polished or powder coated.