Built for mud, weather and impact

Custom Metal Parts for Agricultural Machinery

Custom agricultural equipment fabrication: structural brackets, guards, hoppers, panels and welded frames in heavy-gauge steel — specified for outdoor exposure, abrasive contact and vibration loading farm machinery actually sees.

Up to 6.0 mm — Production gauge
400T — Heavy press capacity
Galvanized — Corrosion base
MIG welded — Structural joints

Specified for the field, not the showroom

Agricultural equipment lives outdoors under vibration, impact and abrasive contact. Gauge selection, weld sizing and coating are chosen for that reality rather than for the lowest quote.

Heavy gauge handled properly

Our 400-ton press capacity and 25 mm laser cutting range cover the heavier sections agricultural work needs. Thicker material means larger bend radii and different weld preparation — planned in, not discovered.

Coating chosen for exposure and abrasion

Powder coating over galvanized steel gives the best combination of corrosion resistance and impact tolerance for equipment that will be pressure-washed and knocked about.

Specifications

Primary materials	Hot rolled steel, cold rolled steel, galvanized steel, SS304
Thickness range	1.5 – 6.0 mm production; laser cutting to 25 mm carbon steel
Press capacity	Up to 400 ton for heavy stamped sections
Welding	MIG for structural joints, TIG where finish matters
Forming	CNC press brake to 3,200 mm with heavy-gauge tooling
Finishing	Powder coating, hot-dip compatible galvanized base material, zinc plating
Quality basis	ISO 9001:2015 · registration 34025Q30296R0S

FAQ

What thickness can you handle for agricultural parts?

Production forming runs to 6.0 mm, with laser cutting up to 25 mm on carbon steel for heavy plate components. Our 400-ton press capacity covers heavy stamped sections.

Do you supply hot-dip galvanized parts?

We fabricate from galvanized base material and apply powder coating in-house. For post-fabrication hot-dip galvanizing on completed weldments, tell us at RFQ so it is coordinated and priced into the lead time.

What coating survives pressure washing and field exposure?

Powder coating over galvanized steel gives the best balance — 500–1,000+ hours neutral salt spray plus impact tolerance. Zinc plating alone is not suitable for equipment that lives outdoors.

Can you weld heavy structural frames?

Yes. MIG welding handles structural thickness efficiently, with fixture-controlled sequences to manage distortion and post-weld dimensional verification before coating.

Do you make replacement parts from a sample?

Yes. Send the physical part and we can reverse-engineer it to a drawing, then confirm material, tolerance and finish with you before production. A drawing is faster and more accurate, but a sample works.

What is the minimum order for agricultural components?

Production orders can start from a single piece. Prototype and first-article parts are produced from a single unit, which is worth doing on structural parts before committing to a batch.